Epoxy Based
| Primer | |
| Transpoxy Primer | 1.16 |
| Kospoxy Universal Primer | 1.18 (1.657) |
| Transpoxy Zinc Rich Primer | 1.55 |
| Transoplate Epoxy Primer | 1.57 |
| Transozinc Epoxy Primer | 1.59 |
| Transpoxy Zinc Rich Primer | 1.79 |
| Transpoxy Tar | AA 2.12 |
| Transpoxy Masterbond | 4.66 |
| Transpoxy Primer | KPC-116 |
| Transpoxy Uniprimer | KPC-917 |
| Transpoxy High Build ZP primer | KPC-941 |
| Undercoat | |
| Transvinypox | 2.06 |
| Transpoxy HB | KPC-940 |
| Transpoxy HB MIO | KPC-945 |
| Top Coat / Finish | |
| Transpoxy Finish | 4.60 (E-Series) |
| Transpoxy TankGuard | 4.61 |
| Transpoxy Deep Tanks | 4.62 |
| Transpoxy Masterbond | KPC-466 |
| Transpoxy Masterbond | KPC-466-AL |
| Transpoxy Masterbond | KPC-466-MIO |
| Transpoxy Finish | KPC-459 |
| Transpoxy Tar | KPC-210 |
Epoxy Flooring Paint Malaysia
Epoxy flooring is usually used for industrial and commercial flooring. The epoxy coatings are commonly applied over the concrete floors, which provides a high smooth, durable and high-performance surface that can last for many years while withstanding heavy loads.
In fact, many industrial sites, commercial buildings and warehouses are relying on epoxy floor paint to maintain a clean and safe working environment for workers, equipment and inventory.
Preparation of Epoxy Floor Paint
Epoxy paint typically requires a clean and slightly porous surface to adhere properly. Epoxy could not bond to sealed or polished the concrete. The concrete itself must be fully cured. Before applying the epoxy coating, it is crucial to patch and repair all major chips and cracks in the surface of concrete and remove all the grease.
Before applying the epoxy paint, ensure that the temperature was in optimal condition, and follow all the recommendations from the manufacturer. An unfavourable temperature could cause the epoxy coating to peel and bubble. Epoxy paint is a two-part liquid that you mix before application. Once the product is mixed, you have to apply the epoxy coating instantly before it starts to harden.
Moreover, the ease of application and thickness of the epoxy paint also depends on the volume of solids content. If the percentage of solids epoxy is 100%, that means you have 100% of the product on the floor after it cures. On the other way around, 50% solids mean you will have 50% of the product remaining on the floor after it has cured. The reasons for this are that the carrier agent like solvents or water, which are commonly used in the lower solid product, will evaporate out as the epoxy cures.
The Advantages of Epoxy Floor Coating
The price of epoxy paint might differ from each of the manufacturers in Malaysia, the majority of the functions and advantages are pretty much the same. Besides, the epoxy floor coatings have much more advantages when compared to other coatings when applied over the concrete:
-
Durable and easy to clean
-
Resists water and oil stains
-
Create a shiny and glossy surface
-
Can be combined with paints and colours to mask off the chips and cracks
-
Prevent wear and tear on existing concrete floors
-
Require less or no major maintenance
-
Quick and easy to install